Gearing detail for Ingo's pedal-powered grinder / sharpener

Ingos_pedal_sharpener_gearing.jpg

See a photo of this pedal-powered sharperner in action

  • The sharpener is driven by some old bike chains that I put together.
  • I drilled and bolted abike chainring on the fly wheel then secured arear bike cog on the sharpening shaft to drive it with the bike chain.
  • What I really like about this is bike sharpener that I can control the speed for sharpening my carving tools.especaily my small knives,no risk of damage to the tools or over heating,better than machine driven and alot faster by hand.

 

Comments

Post new comment

The content of this field is kept private and will not be shown publicly.
CAPTCHA
This question tests whether you are a human visitor, to prevent spam submissions.
The answer can easily be found on this site if you don't know it.
Don't stress - if you get it wrong, you'll get another chance, just try again :-)
5 + 4 =
Solve this simple math problem and enter the result. E.g. for 1+3, enter 4.
To prevent automated spam submissions leave this field empty.